Epson Stylus Pro 10000 Service Manual page 326

EPSON Stylus Pro 10000/10000CF/10600
Printer Setting Menu
Table 8-6 shown the Printer Setting Menus.
Setting Item
PG Setting
Page Lines
Interface Select
Code Page Switching
Roll Paper Margin
Detect Paper Width
Detect Skew Error
Job Timeout Setting
Panel Setup Value Initialization
NOTE: Underlined values are the default settings.
Stylus Pro 10600
Thank You For Using TheServiceManualShop.com
Table 8-6. Printer Setting Menus
LCD panel Display Setup Values
PLATEN GAP NARROW, AUTO, WIDE
ON, OFF
PAGE LINE
AUTO, PARALLEL, USB, OPTION1,
INTERFACE
OPTION2
PC437, PC850
CODE PAGE
T/B 15MM,
ROLL MARG
3MM, 15MM
ON, OFF
PAPER SIZE CHK
PAPER ALIGN CHK ON, OFF
OFF, 30sec, 60sec, 180sec, 300sec
JOB TIMEOUT
EXEC
INIT SETUP
Thank You For Using TheServiceManualShop.com
Adjusts the platen gap. (Normally, leave set to Auto.)
When Auto Cut Off is selected on the operating Panel, this setting
determines whether a line for manual cutting is printed.
Determines which interface the printer checks for data.
(Auto continuously checks all interfaces and is good for normal use.)
Character code setting.
(PC437: expanded graphics
PC850: multi-lingual)
Roll sheet margin setting.
• Top/Bottom 15mm:
top and bottom margins = 15mm
left and right margins = 3mm
• 15mm: all margins = 15mm
• 3mm all margins = 3mm
Determines whether the paper size check is enabled
Determines whether the paper skew check is enabled
Job timeout
Initialize printer setup value
Product Description
Revision D
Detail Reference
page 320
page 320
page 320
page 320
page 320
page 320
page 320
page 320
page 320
319