Feed Adjustment - Epson Stylus Pro 10000 Service Manual

EPSON Stylus Pro 10000/10000CF/10600

5.4.4.12 Feed adjustment

Perform the distance revision in the paper conveyance. Print the line pattern in
direction of paper feeding and input the distance in order to decide the PF encoder
resolution by firmware. Figure 5-65 showing adjustment menu sequence and Figure
5-66 showing print pattern.
[Enter] Adjust Print
Enter
Printing Pattern
Print END
V Length : +1000.000mm
Enter
Start the print with "Enter" key.
Enter
Printing Pattern
Enter
Figure 5-65.
Adjustment
Thank You For Using TheServiceManualShop.com
Press the [Pause] key to select
the [V Length] input menu.
Adjustable with "Paper Feed +/
-" key at unit of 0.001 mm.
Press the [Pause] key to select
the [Top & Bottom] menu.
Thank You For Using TheServiceManualShop.com
Self-Diagnostics
<Print pattern>
Adjustment item: Paper feed length
Printing method: Length 1000mm/ Two pass with Uni-D at 720dpi resolution for CR
and 360dpi for PF.
Figure 5-66.
Revision D
239