Epson Stylus Pro 10000 Service Manual page 4

To prevent accidents during a maintenance procedure, strictly observe the Warnings and Cautions. Do not do anything that is dangerous or not within
the scope of this document.
Do not do anything that is dangerous even if not specifically described in this manual. In addition to the descriptions below and those given in this
manual, there are many situations and circumstances that are dangerous. Be aware of these when you are working with the printer.
Laser Beam
The laser beam used for Auto Print Head
W A R N I N G
Optimization System is a very powerful, straight,
narrow beam of light that produces extreme heat at
its focal point. Direct eye exposure to the laser beam
may cause eye injury or blindness. Never place a
mirror or a reflective tool or object in the laser beam
path.
To avoid permanent eye damage, follow these directions;
Before starting any service procedure, switch off the printer
power and unplug the power cord from the wall outlet.
Do not disassemble the Flushing Duct or any laser component
that displays Laser Warning Sticker.
Use caution when you are working around the Flushing Duct or
when you are performing laser related repair procedures.
Do not disassemble the printer in such a way that the laser
beam can exit the printer engine during a print cycle.
Thank You For Using TheServiceManualShop.com
Safety Information
Thank You For Using TheServiceManualShop.com