Epson Stylus Pro 10000 Service Manual page 370

EPSON Stylus Pro 10000/10000CF/10600
1
2
Gap 300, V2, M 0
Item
SelecType
Gap 300, V2, LC 0
SelecType Item
Gap 300, V2, LM 0
Item
SelecType
Gap 300, V2, Y 0
Item
SelecType
Gap End
SelecType
Item
Figure 8-8. Uni-D adjustment menu sequence
When press the "Enter" button during the "Gap End" display, operation mode shift
to the "Adj: Feed Adj.".
Print all of the test pattern when "Enter" button is pressed during the "[Enter]
Adjust Print" display.
Print the related pattern when press the "Enter" button after the value change.
Difference of maximum and minimum correction value are within 64/1440 inch
with six colors.
Stylus Pro 10600
Thank You For Using TheServiceManualShop.com
3 4
Adjustable with "Paper Feed +/-"
button at unit of 1/2880 inch.
Adjustable with "Paper Feed +/-"
button at unit of 1/2880 inch.
Adjustable with "Paper Feed +/-"
button at unit of 1/2880 inch.
Adjustable with "Paper Feed +/-"
button at unit of 1/2880 inch.
Thank You For Using TheServiceManualShop.com
Print pattern
Figure 8-9. Uni-D adjustment print pattern
Adjustment
Revision D
363