EPSON Stylus Pro 10000/10000CF/10600
7.
Remove the Hinge Unit L with Hinge.
8.
While supporting the Front Cover, lower the left side and slide to left, then remove
the Front Cover.
When removing / installing, hold the "Front Cover" with your
C A U T I O N
hand and do not drop it.
When installing the "Front Cover", make sure the shape of
cover springs. (Shape are different with right and left.)
Confirm the movement of the cover and operation of the cover-
open sensor (mounted inside of right hinge unit).
When installing, make sure the shape (D cut) of shaft on the
both hinge unit then align the shaft hole on the Front Cover.
Front Cover
Hole
Disassembly & Assembly
Thank You For Using TheServiceManualShop.com
Hinge unit
Figure 4-36.
Thank You For Using TheServiceManualShop.com
4.3.1.11 Removing Paper Guide U
1.
Remove the H Top Cover as described in 4.3.1.3 "H Top Cover Removal".
2.
Remove the Rear Cover as described in 4.3.1.7 "Rear Cover Removal".
3.
Remove the six screws (CS: M4x8) securing the Paper Guide U.
(Right side view)
(Right-Rear side view)
Screws
Disassembly
Revision D
Paper Guide U
(Left-Rear side view)
Screws
Figure 4-37.
131