Encoder - Epson Stylus Pro 10000 Service Manual

EPSON Stylus Pro 10000/10000CF/10600
"INK NOT xxxxxx" : Display of "xxxxxx" means ink cartridge name with
symbolic code.
"EdgeAD xxxyyy"/"FrontAD xxxyyy/"RearAD xxxyyy" :
: Display of "xxx" means difference from ON minus Off, "yyy" means ON level.
Following figure showing the relation of sensor display and sub tank ink amount.
U side
sensor
L side
sensor
When display "L" When display "1"
Figure 5-17.
"F" will display when the overflow condition is presented.
"Laser xxxx" :Display of "xxx" means AGC thresh hold value. If the value is less
than "2208" you need to replace the dot missing detector unit.
Adjustment
Thank You For Using TheServiceManualShop.com
U side U side
sensor sensor
L side L side
sensor sensor
When display "2"
Thank You For Using TheServiceManualShop.com
Self-Diagnostics

5.4.3.5 Encoder

Display the CR and PF encoder value.
Figure 5-18 showing the encoder test sequence.
Encoder : CR xxxx
Encoder : PF xxxx
Figure 5-18.
Display unit is the number of encoded pulse.
Revision D
Item
0000
SelecType
Item
FFFF
SelecType
211