Tools For Adjustment/Special Operations - Epson Stylus Pro 10000 Service Manual

EPSON Stylus Pro 10000/10000CF/10600

5.1.2 Tools for Adjustment/Special Operations

This section describes about tools that is required by adjustment/special operations for
required adjustment.
Table 5-2. Adjustment Tools
Name Part Code
B747700300/
Tension Gauge #F712
Standard tool
User's data memory card
1050073
Standard
Program data memory
PC card acceptable
card
• 44 inch roll paper
EPSON special
• Doubleweight Matte
media
roll paper (44 inch)
Kimoto brand:
A3 Tracing paper
MicroTrace
#300LMB
A3 copy paper Standard paper
(+)Screw driver(2) Standard tool
Tension Gauge with
EPSON special tool 300g
attachment
Screw lock tight
Paper thickness gauge
Standard tool
(0.6mm)
Paper thickness gauge
Standard tool
(0.7mm)
Precision screw driver Standard tool
Ink discharge cartridge 1060627
Cleaning liquid cartridge 1060626
Cutter positioning tool 1070178
CR-ENC setting tool 1070171
Adjustment
Thank You For Using TheServiceManualShop.com
Notes
Max. 4000g measurement
Type: 2MB Flash memory card
Standard: Type-II (PCMCIA Rel 2.1/JEIDA
Ver. 4.2)
Voltage: 5V Read/Write
Necessary for mechanism-adjustment
printouts
Necessary to determine P_FRONT and
P_REAR sensor volumes
Necessary to determine P_EDGE sensor
volume
0.6 mm
0.7 mm
Ink type detection
Print head and tube cleaning
Cutter blade position adjustment
CR-RNC position adjustment
Thank You For Using TheServiceManualShop.com
Adjustment Outline
Table 5-2. Adjustment Tools
Name Part Code
Scale insertion tool 1070174
Starter Cartridge Lc 1062231
Starter Cartridge Lc 1062243
Starter Cartridge Lc 1062237
Starter Cartridge Lc 1062249
NOTE: Except the Phillips screwdriver and the slotted Screwdriver.
Revision D
Notes
CR_loop scale fixing
Stylus Pro 10000 (except EAI market)
Stylus Pro 10000CF (Except EAI market)
Stylus Pro 10000 ( EAI market)
Stylus Pro 10000CF ( EAI market)
189