Epson Stylus Pro 10000 Service Manual page 165

EPSON Stylus Pro 10000/10000CF/10600
6. Temporarily set the Weight in place against the Retainers with 4 screws. (Do not
tighten.)
CP M3X14
Figure 4-101. Attach the Weight
Apply screw locking glue to the tips of M3x14 screws.
C A U T I O N
Disassembly & Assembly
Thank You For Using TheServiceManualShop.com
7. Insert 1.60mm thickness gauges between the left and right sides of the Weight and
the Head and leave them in place.
W Sems M3X8
Thank You For Using TheServiceManualShop.com
Disassembly
Insert 1.60mm thickness gauges
Figure 4-102. Insert thickness gauges
Revision D
158