Epson Stylus Pro 10000 Service Manual page 96

EPSON Stylus Pro 10000/10000CF/10600
Table 3-20. Ink cover open
Item
LCD message CLOSE INK CART. COVER
LED indicator
N/A
status
The error occurs in following cases.
Explanation 1. If ink cover is opened during printing.
2. If ink cover is opened except above status.
Recovery Close ink cartridge cover.
Table 3-21. Wrong ink cartridge
Item
LCD message WRONG CARTRIDGE
LED indicator status Corresponded color LED goes on.
This error occurs when ink type mismatch between ink cartridge and
Explanation
printer.
Recovery Install the correct ink cartridge in the printer.
Table 3-22. Illegal ink cartridge
Item
LCD message INVALID CARTRIDGE
LED indicator status Corresponded color LED goes on.
Explanation This error occurs when invalid ink cartridge is installed.
Recovery Install the correct cartridge, and push PAUSE button.
Troubleshooting
Thank You For Using TheServiceManualShop.com
Description
Description
Description
Thank You For Using TheServiceManualShop.com
Troubleshooting Using the Error Messages
Table 3-23. Defective ink Cartridge
Item
LCD message DEFECTIVE INK CRTG
LED indicator status Corresponded color LED goes on.
This error occurs when ink cartridge CSIC includes problems or
Explanation cartridge is in connection error (such as when CSIC is failed to read/
write after confirmation of ink cartridge insert).
If it occurred because of connection error, release ink lever (at time,
"INK COVER OPEN" is displayed) and re-insert ink cartridge. If
Recovery
error is still not solved, ink cartridge needs to be changed to the one
ink filled up.
Table 3-24. Wrong IK designation
Item
LCD message COMMAND ERROR
LED indicator status All color LEDs blink
This error occurs in following conditions:
• When ink type designated with remote command "IK" is
different from ink cartridge installed in the printer.
Explanation
• When ESC/P3 transport command is received while ESC/P3
board is not set on printer.
• When data with invalid command sequence is received on ESC/
P2 mode.
Recovery Stop data transmitting from the host and reset the panel.
Revision D
Description
Description
89