Operating Panel - MIMAKI JV330 Series Operation Manual

Operating Panel

This is used to control the product and make/change settings.
No. Name
1 Display
2 [SEL] key
3 [FUNCTION] key
4 [JOG] key
5 [END/POWER]
key
6 [ENTER] key
7 Status lamp
xxxx
1
MENU
2
4
5
"Display"(P. 34)
Selects the function for the corresponding [FUNCTION] key.
Used for test printing, head cleaning, and editing settings
key"(P. 35)
Used to move the carriage, feed media, and select settings
Used to cancel the last setting entered, return to the previous level of the setting
menu, or to turn power on and off
• Illuminates in blue when the power is on.
• To turn off the power, hold down the key.
Used to move to the next level menu and to confirm settings. This can also be
used to display product information.
Guidance)"(P. 35)
This lamp indicates the machine status.
Off Indicates LOCAL mode. Used for test printing, maintenance,
and settings
Light Illumina Indicates REMOTE mode. The product is in standby to receive
blue ted print data.
Flashin Indicates that printing is in progress. This also flashes to
g indicate test printing—for example, when printing built-in
patterns.
Blue Illumina Indicates that data remains to be printed. Switch to REMOTE
ted mode and start printing
Green Flashin Indicates that automatic maintenance is underway. Some
g functions will be limited until maintenance has ended.
Yellow Flashin Ink Near End status (very little ink remains).
g Near End is Displayed"(P. 45)
Red Flashin An error has occurred. Refer to the error code list and take
g appropriate action.
Illumina A system error (SYSTEM HALT) has occurred. Contact our
ted service office.
TEST PRINT
REMOTE
CLEANING
3
6
7
Overview
"Turning On the Power"(P. 36)
"Turning Off the Power"(P. 37)
"Displaying Machine Information (Local
"Error Message"(P. 233)
"SYSTEM HALT"(P. 242)
33
Chapter 1 Before Use
"[FUNCTION]
"When Ink
1