HIGH-PRESSURE PUMP/HIGH-PRESSURE PUMP DRIVE
Removing, installing the high-pressure pump/high-pressure pump drive
Additional jobs
–
Removing, installing the combination air lter, see 187
–
Removing, installing engine control units, see 27
–
Removing, installing the combination air lter holder, see 193
–
Removing, installing the engine wiring harness, see 25
–
Removing, installing the charge air manifold, see 181
–
Removing, installing the cooling system, see 55
–
Removing, installing the fan V-belt, see 85
–
Removing, installing the ramfan, see 61
–
Removing, installing the intermediate ange, see 63
–
Removing, installing the fan tensioning pulley, see 89
–
Removing, installing the fan carrier with fan bearing, see 91
–
Removing, installing the coolant pump coolant manifold, see 73
–
Removing, installing fuel lines, see 141
–
Removing, installing coolant lines, see 65
(1) High-pressure pump, master
Technical data
Mounting bolts, high-pressure pump ................................................................................................60 Nm
High-pressure line (initial use) ............................... M14x1.5 ........................................ Initial torque 10 Nm
High-pressure line (initial use) ............................... M14x1.5 .........................................Final tightening 60°
High-pressure line (reuse)..................................... M14x1.5 ........................................ Initial torque 10 Nm
High-pressure line (reuse)..................................... M14x1.5 .........................................Final tightening 30°
(2) High-pressure pump, slave
AE6 3st edition
COMMON RAIL SYSTEM
129