Man D2862 LE221 Repair Manual page 279

Assembling the oil module
Installing the oil lter
• Pull the new O-ring (2) onto the oil lter cover (1)
• Thinly apply clean engine oil to MAN Standard
3277 on the O-ring (2)
• Insert the new oil lter insert (3) into the oil lter
cover (1)
• Screw in the oil lter cover (1) with
36 [106] and tighten to
Installing the oil separator
• Fit the new O-rings (3) and (4)
• Insert the oil separator (1) into the oil module
• Screw in and tighten the mounting bolts (2)
Socket, size
45 Nm
AE6 3st edition
Installing the oil cooler
• Insert the oil cooler (3) with new seals (2)
• Screw in the mounting bolts (1) as marked and
tighten them until nger-tight
• Tighten the mounting bolts (1)
ENGINE LUBRICATION
277