Man D2862 LE221 Repair Manual page 278

ENGINE LUBRICATION
Dismantling the oil module
Removing the oil cooler
WARNING
Component damage due to setting
aside the oil module incorrectly
• Put the oil module aside so as not to
damage the oil cooler
• Mark the installation position of the mounting
bolts (1)
• Unscrew the mounting bolts (1)
• Remove the oil cooler (3) with the seals (2)
• Clean the sealing surfaces
Removing the oil separator
• Unscrew the mounting bolts (2)
• Pull the oil separator (1) out of the oil module
• Remove the O-rings (3) and (4)
276
Removing the oil lter
WARNING
Engine oil contamination
• Always allow all of the engine oil to drain
• Unscrew the oil lter cover (1) 2-3 turns with the
Socket, size 36 [106]
• Unscrew and remove the oil lter cover (1) with
Socket, size 36 [106]
• Remove the oil lter insert (3) from the oil lter
cover (1)
• Remove the O-ring (2)
AE6 3st edition
after approx. 1-2 minutes