Man D2862 LE221 Repair Manual page 42

ENGINE ELECTRICS
Removing the oil pressure sensor
Disconnecting the electrical connection
• Disconnect the electrical connection (1)
Removing the oil pressure sensor
• Unscrew and remove the oil pressure sensor (1)
with the sealing ring (2)
40
Installing the oil pressure sensor
Installing the oil pressure sensor
• Lightly apply clean
oil pressure sensor
• Screw in the oil pressure sensor (1) with a new
sealing ring (2) and tighten to
Connecting the electrical connection
• Connect the electrical connection (1)
AE6 3st edition
Engine oil on the thread of the
47 Nm