Man D2862 LE221 Repair Manual page 115

Installing the right rail pressure sensor
WARNING
Component damage due to lack of
lubricant
• Do not wash off the pressure limiting
valve and rail pressure sensor as the
thread and biting edge are coated with
lubricant
Note
The left rail pressure sensor is installed
in the same way as the right rail pressure
sensor
• Remove the caps and plugs
• Screw in the rail pressure sensor (1) and tighten it
to 80 Nm
Installing the right pressure limiting valve
WARNING
Component damage due to lack of
lubricant
• Do not wash off the pressure limiting
Note
The left pressure limiting valve is installed
in the same way as the right pressure
limiting valve
• Remove the caps and plugs
• Pull the new O-ring (2) onto the pressure limiting
valve (1)
• Screw in the pressure limiting valve (1) and tighten
to 100 Nm
AE6 3st edition
COMMON RAIL SYSTEM
valve and rail pressure sensor as the
thread and biting edge are coated with
lubricant
113