OIL PUMPS
Removing, installing oil pumps
Additional jobs
–
Removing, installing the cooling system, see 55
–
Removing, installing the fan V-belt, see 85
–
Removing, installing the ramfan, see 61
–
Removing, installing the intermediate ange, see 63
–
Removing, installing the fan tensioning pulley, see 89
–
Removing, installing the fan carrier with fan bearing, see 91
–
Removing, installing the coolant pump coolant manifold, see 73
–
Removing, installing the coolant pump, see 77
–
Removing, installing the poly-V-belt, see 93
–
Removing, installing the automatic belt tensioner, see 95
–
Removing, installing the guide roller, see 97
–
Removing, installing the alternator, see 99
–
Removing, installing the vibration damper, see 309
–
Removing, installing the cover, see 359
–
Removing, installing the front radial shaft seal, see 297
– Draining the coolant, see Operator's Manual
– Draining the engine oil, see Operator's Manual
(1) Oil pump
Technical data
Backlash, ring gear – crankshaft gear ............................................................................ 0.060 – 0.240 mm
Axial play, ring gear ...................................................................................................... 0.040 – 0.090 mm
(2) Oil pump
AE6 3st edition
ENGINE LUBRICATION
289