CRANKSHAFT OIL SEALS
Removing, installing the front radial shaft seal
Additional jobs
–
Removing, installing the cooling system, see 55
–
Removing, installing the fan V-belt, see 85
–
Removing, installing the ramfan, see 61
–
Removing, installing the intermediate ange, see 63
–
Removing, installing the poly-V-belt, see 93
–
Removing, installing the vibration damper, see 309
–
Removing, installing the cover, see 359
–
Removing, installing the front radial shaft seal, see 297
(1) Front radial shaft seal
Important information
WARNING
PTFE sealing rings are rendered unusable if they come into contact with oil or grease before
installation
• Clean the vibration dampers and installer sleeve before assembly
WARNING
Component damage due to incorrectly tightened screw/bolt connections
• If impact wrenches are used, these may only be used for pretightening to max. 50% of the
specied tightening torque
• Final tightening must always be performed manually using a torque wrench
AE6 3st edition
CRANKSHAFT OIL SEALS
297