Man D2862 LE221 Repair Manual page 197

Installing the combination air lter
holder
Attaching the carrier
• Position the carrier (1)
• Screw in and tighten the mounting bolts (2)
• Repeat the same procedure for other supports
Attaching the combination air lter holder
• Position the combination air lter holder (1)
• Screw in and tighten the mounting bolts (2)
• Repeat the procedure for the other holder
Attaching the holder for the injector wiring
harness
• Position the injector wiring harness holder (1) with
spacer bush (2)
• Screw in and tighten the mounting nuts (3)
• Repeat the procedure for the other holder
Attaching corrugated pipes
• Clip corrugated pipes (1) and (3) into the
corrugated pipe holders (2) and (4)
AE6 3st edition
INTAKE/EXHAUST SYSTEM
195