COVER
Removing, installing the cover
Additional jobs
–
Removing, installing the cooling system, see 55
–
Removing, installing the fan V-belt, see 85
–
Removing, installing the ramfan, see 61
–
Removing, installing the intermediate ange, see 63
–
Removing, installing the fan tensioning pulley, see 89
–
Removing, installing the fan carrier with fan bearing, see 91
–
Removing, installing the coolant pump coolant manifold, see 73
–
Removing, installing the coolant pump, see 77
–
Removing, installing the poly-V-belt, see 93
–
Removing, installing the automatic belt tensioner, see 95
–
Removing, installing the guide roller, see 97
–
Removing, installing the vibration damper, see 309
–
Removing, installing oil modules, see 269
–
Removing, installing the front radial shaft seal, see 297
–
Removing, installing oil pumps, see 289
(1) Cover
Technical data
Coolant temperature sensor .................................. M16x1.5 ............................................................47 Nm
Service products
Engine oil..................................see Maintenance Recommendations and Recommended Service Products
AE6 3st edition
CRANKCASE
359