Completion Of The Engine And Assembly Of The Drive System; Mounting An Alternator On The Flywheel Housing - Man E3268 LE212 Operating Instructions Manual

6.4 Completion of the engine and assembly of the drive system

When installing the engine, ensure that there is enough space to perform the regular maintenance work
specified in the maintenance schedule.
6.4.1

Mounting an alternator on the flywheel housing

Flywheel
The connection dimensions of the flywheel
indicated on the installation drawing.
S Remove oil, grease and preservative from the
flywheel.
Flywheel housing
User tip
For screw and bolt tightening torques, see page
52.
Information regarding the dimensions of the fly­
1
wheel housing and the type of screw and bolt
connections for mounting the alternator can be
found on the installation drawing.
Carefully read these Operating Instructions before starting any work!
This is especially valid for the chapter on General Safety Instructions
and the safety instructions in each of the chapters.
Installation and Commissioning
1 are
45