Man D2862 LE221 Repair Manual page 32

ENGINE ELECTRICS
Detaching the engine control unit bracket
• Remove the compression springs (5) with spacer
bushes (1)
• Remove the bracket (2)
• Remove compression springs (4) with stop for
control unit bracket (3)
30
Installing the engine control units
Attaching the engine control unit bracket
• Position the stop for control unit bracket (3) with
compression springs (4)
• Position the bracket (2)
• Position the compression springs (5)
• Insert the spacer bushes (1)
Attaching the engine control unit bracket
• Put on the stop for control unit bracket (2)
• Insert the mounting bolts (1)
• Screw on the mounting nuts (4) with washers (3)
and tighten them
AE6 3st edition