Removing the right air distribution pipe
• Mark the installation position of the mounting bolts
(1) and (2)
• Remove the air distribution pipe (3) with seals (4)
• Clean the sealing surfaces
Installing the right air distribution pipe
Installing the right air distribution pipe
• Clean the sealing surfaces
• Position the air distribution pipe (3) with new seals
(4)
• Screw in the mounting bolts (1) and (2) as marked
• Tighten the mounting bolts (1) and (2)
Attaching the holder
• Position the holder (3) with washer (1)
• Screw in and tighten the mounting bolt (2)
AE6 3st edition
INTAKE/EXHAUST SYSTEM
203