Installing the right oil return line
• Position the oil return lines (1) and (2) so that they
are strain-free
• Tighten the union nuts for the oil return lines (1)
and (2)
• Mount the fastening (3)
Installing the left oil module
• Clean the sealing surfaces
• Insert new O-rings (5)
• Position the oil module (6) with a new seal (3)
• Position the wiring harness holder with bush as
marked
• Screw in the mounting bolts (1), (2), (7) and (8) as
marked
Tightening diagram for left oil module
• Tighten the mounting bolts (4)
• Unscrew the mounting bolts (4) 60°
• Tighten the mounting bolts (1), (2), (3) and (5)
• Tighten the mounting bolts (4)
Attaching the left oil return line
• Position the oil return lines (2) and (3) so that they
are strain-free
• Tighten the union nuts for the oil return lines (2)
and (3)
• Mount the fastening (1)
AE6 3st edition
ENGINE LUBRICATION
273