Man D2862 LE221 Repair Manual page 92

ADD-ON UNITS
Removing the fan tensioning pulley
Detaching the fan tensioning pulley
• Detach the V-belt pulley (6)
• Unclip the circlip (5)
• Pull out the fan bearing (4)
• Unscrew the mounting bolt (7) and remove with
the washer
• Unscrew the mounting nuts (1) and pull out the
mounting bolts (3)
• Remove the tensioning pulley carrier (2)
90
Installing the fan tensioning pulley
Attaching the fan tensioning pulley
• Position the tensioning pulley carrier (2)
• Insert the mounting bolts (3)
• Screw on the mounting nuts (1) until nger-tight
• Screw in the mounting bolt (7) with washer and
tighten until nger-tight
• Insert the fan bearing (4)
• Attach the circlip (5)
• Attach the V-belt pulley (6)
AE6 3st edition