Table of Contents
Advertisement
Removing the ywheel
Assembling the special tool
• Insert the
Torque multiplier i = 1 : 3.3 [128]
the
Support [129]
(2)
• Attach the
Holding device [131]
Cylinder head bolt [133]
(3) on the
Support [129]
• Put the
Torque angle gauge [130]
multiplier i = 1 : 3.3 [128]
• Put the
Socket, size 22 [127]
multiplier i = 1 : 3.3 [128]
the
Connecting pin [134]
42 mm [135]
(6)
• Insert one
Socket E24 [137]
device [131]
(5) and the
Unscrewing the ywheel mounting bolts
• Place the special tool (2) onto the mounting bolt
(1) that is going to be unscrewed
• Unscrew the mounting bolts (1) using the special
tool (2) in conjunction with the
(1) into
(5) with the
(4) and the
Adapter [136]
(2)
(9) on the
Torque
(1)
(8) on the
Torque
(1) and secure using
(7) and
Rubber ring
each into the
Holding
Socket, size 22 [127]
(8)
Socket [132]
AE6 3st edition
Unscrewing the ywheel mounting bolts
• Unscrew two opposite mounting bolts (1) and (2)
Screwing in the aligning tools
• Screw in the
Aligning tool [126]
• Unscrew the remaining mounting bolts
CRANK MECHANISM
(1) and (2)
319
Hide quick links:
Advertisement
Table of Contents
