Removing the front radial shaft seal
WARNING
Danger of component damage on the
cover
• Ensure that the
does not hook in behind the cover
• Extract the radial shaft seal (1) using
extractor [109]
(3) and
Extractor hook [110]
Impact
Extractor hook [110]
(2)
AE6 3st edition
CRANKSHAFT OIL SEALS
Installing the front radial shaft seal
• Assemble the
Pressing plate [114]
Plug-on handle [112]
(1) and
• Put the closed side of the radial shaft seal (4) onto
the special tool
• Screw in the
Aligning tool [111]
• Push the special tool onto the
(5)
• Press in the radial shaft seal (4) as far as the stop
using the special tool
• Remove the special tool
(3) with the
Washer [113]
(2)
(5)
Aligning tool [111]
299