PISTONS AND CONNECTING RODS
Removing, installing a piston with its connecting rod
Additional jobs
–
Removing, installing the turbocharger, see 173
–
Removing, installing the oil sump, see 281
–
Removing, installing the oil injector nozzles, see 279
–
Removing, installing the cylinder head cover, see 213
–
Removing, installing injector with nozzle, see 115
–
Removing, installing the rocker arm mechanism, see 217
–
Removing, installing the cylinder head, see 223
–
Checking and setting the valve clearance, see 238
(1) Double-bevelled ring
(2) Taper-face ring
(3) Keystone ring
(4) Internal circlip
(5) Piston pin
Technical data
Connecting rod bearing bolt .................................. M14x1.5x66-10.9 ..........................Initial torque 100 Nm
Connecting rod bearing bolt .................................. M14x1.5x66-10.9 ............................Final tightening 90°
Connecting rods
Connecting rod length, small end bush centre – connecting rod bearing centre ...............282.45 – 282.5 mm
Connecting rod bearing dimensions
Connecting rod bearing normal dimension ..................................................................96.047 – 96.099 mm
(6) Piston
(7) Internal circlip
(8) Connecting rod
(9) Connecting rod bearing cap
(10) Connecting rod bearing bolt
AE6 3st edition
CRANK MECHANISM
323