Figure 2–5. PC/Terminal to Maintenance Port Connection
CAUTION: The maintenance port described in this book generates,
uses, and can radiate radio-frequency energy through cables that are
connected to it. This energy may interfere with radio and television
reception. Disconnect all maintenance port cables when you are not
communicating with the controller.
Follow these steps to establish a local connection for setting the controller's initial
configuration:
1.
Turn off the PC or terminal and connect it to the controller as shown in
Figure 2–6.
a.
Plug the maintenance port cable into the maintenance port for a PC
connection.
Compaq HSZ80 Array Controller ACS Version 8.3 Configuration and CLI Reference Guide
6
5
4
3
2
1
Maintenance
port
2–27
Maintenance
port cable
CXO6484A