Compaq StorageWorks HSZ80 Configuration And Cli Reference Manual page 255

5–69
Examples
This example shows how to cause the amber device fault LED on device DISK10000
to flash:
LOCATE DISK10000
LOCATE CANCEL
This example shows how to cause the device fault LEDs on all of the devices assigned
to disk unit number D102 to flash:
LOCATE D102
This example shows how to cause the device fault LEDs on all configured disk
devices to flash:
LOCATE DISKS
This example shows how to turn off the flashing device fault LEDs on all devices:
LOCATE CANCEL
Compaq HSZ80 Array Controller ACS Version 8.3 Configuration and CLI Reference Guide