5–76
CLI Commands
Table 5–4 Poweroff Switch Settings (Continued)
Battery
Override Switch
Switch
BATTERY_OFF
OVERRIDE_BAD_FLUSH
BATTERY_OFF
OVERRIDE_BAD_FLUSH
BATTERY_OFF
NO_OVERRIDE_BAD_FLUSH
BATTERY_OFF
NO_OVERRIDE_BAD_FLUSH
In dual-redundant controller configurations, if both controllers can't be shutdown,
then both controllers and their ECB chargers remain on.
Example
This example shows how to power off the disk units and the cabinet in 10 seconds:
POWEROFF SECONDS=10
Flush
Results
Success
Controller and units in the cabinet are
shutdown and the ECB is not powering the
cache module.
Failure
Controller and units in the cabinet are
shutdown and the ECB is not powering the
cache module.
Success
Controller and units in the cabinet are
shutdown and the ECB is not powering the
cache module.
Failure
Nothing is shutdown, the ECB is powering
the cache module, and user is notified of a
bad flush.
Action
Need help?
Do you have a question about the StorageWorks HSZ80 and is the answer not in the manual?
Questions and answers