Restart Controller - Compaq StorageWorks HSZ80 Configuration And Cli Reference Manual

RESTART controller

Flushes all user data from the specified controller's write-back cache and restarts the
controller.
Syntax
RESTART controller
Parameters
controller
The controller parameter indicates which controller is to be restarted. Specify
OTHER_CONTROLLER or THIS_CONTROLLER.
Switches
IGNORE_ERRORS
NOIGNORE_ERRORS (Default)
Controls the reaction of the controller based on the status of write-back cache.
Specify IGNORE_ERRORS to instruct the controller to restart even if the data within
write-back cache cannot be written to the devices.
Specify NOIGNORE_ERRORS to instruct the controller to not restart if the data
within write-back cache cannot be written to the devices.
CAUTION: The IGNORE_ERRORS switch might cause the controller to
keep unflushed data in the write-back cache until it restarts and is able
to write the data to devices. Do not perform any hardware changes until
the controller flushes the cache.
Compaq HSZ80 Array Controller ACS Version 8.3 Configuration and CLI Reference Guide
5–83