Compaq StorageWorks HSZ80 Configuration And Cli Reference Manual page 116

3–26 Creating Storagesets
Saving Subsystem Configuration Information
to Multiple Disks
You can save your subsystem configuration information to as many individual disks
as you would like, but you must initialize each using the SAVE_CONFIGURATION
switch. Use the following syntax for each:
INITIALIZE DISKnnnn SAVE_CONFIGURATION
Saving Subsystem Configuration Information
to a Storageset
You can save your subsystem configuration information to a storageset. The
configuration information is duplicated on every disk that is a member of the
storageset. Use the following syntax:
INITIALIZE storageset-name SAVE_CONFIGURATION