Table of Contents
Advertisement
3–50
Creating Storagesets
Local/Remote
Specify the disk characteristics in a mirrorset, either local (default) or remote.
Disks set to REMOTE can only be added to mirrorsets and JBOD (that is, not
RAID5 raidsets).
Disks set to REMOTE can only be added to mirrorsets that are set to
DT_SUPPORT.
Disks set to LOCAL can be added to mirrorsets that are set to either
NODT_SUPPORT or DT_SUPPORT.
Disks set to REMOTE that are part of a mirrorset will not normally be the read
source.
Setting the switch to REMOTE forces a disk to be NOTRANSPORTABLE.
Advertisement
Chapters
Table of Contents
