Compaq StorageWorks HSZ80 Configuration And Cli Reference Manual page 379

PORT_1_PREFERRED_ID, 5–98
PORT_1_TRANSFER_RATE_REQUESTE
D, 5–100
PORT_2_ID, 5–96
PORT_2_PREFERRED_ID, 5–98
PORT_2_TRANSFER_RATE_REQUESTE
D, 5–100
PROMPT, 5–98
SCSI_VERSION, 5–99
TERMINAL_PARITY, 5–99
TERMINAL_SPEED, 5–99
TIME, 5–99
TRANSFER_RATE_REQUESTED, 5–100
SET device-name, 5–102
LOCAL, 5–102
NOTRANSPORTABLE, 5–103
REMOTE, 5–102
TRANSFER_RATE_REQUESTED, 5–103
TRANSPORTABLE, 5–103
SET EMU, 5–105
FANSPEED, 5–106
SENSOR_N_SETPOINT, 5–105
SET FAILEDSET, 5–108
AUTOSPARE, 5–108
NOAUTOSPARE, 5–108
SET FAILOVER, 5–110
SET FAILOVER COPY=controller, 5–110
SET mirrorset-name, 5–112
COPY, 5–112
DT_SUPPORT, 5–113
MEMBERSHIP, 5–113
NODT_SUPPORT, 5–113
POLICY, 5–115
READ_SOURCE, 5–116
REMOVE, 5–114
REPLACE, 5–114
SET MULTIBUS_FAILOVER, 5–118
SET NOFAILOVER, 5–120
DESTROY_UNFLUSHABLE_DATA, 5–120
NODESTROY_UNFLUSHABLE_DATA,
5–120
SET NOMULTIBUS_FAILOVER, 5–122
DESTROY_UNFLUSHABLE_DATA, 5–122
NODESTROY_UNFLUSHABLE_DATA,
5–122
SET RAIDset-name, 5–124
POLICY, 5–124
RECONSTRUCT, 5–125
REMOVE, 5–125
REPLACE, 5–126
SET unit-number, 5–128
DISABLE_ACCESS, 5–130
ENABLE_ACCESS, 5–130
ERROR_MODE, 5–132
MAXIMUM_CACHED_TRANSFER, 5–131
NOPREFERRED_PATH, 5–131
NOREAD_CACHE, 5–132
NOREADAHEAD_CACHE, 5–133
NORUN, 5–133
NOWRITE_PROTECT, 5–133
NOWRITEBACK_CACHE, 5–134
PARTITION, 5–131
PREFERRED_PATH, 5–131
READ_CACHE, 5–132
READAHEAD_CACHE, 5–133
RUN, 5–133
WRITE_PROTECT, 5–133
WRITEBACK_CACHE, 5–134
Setting
cache flush timer, 5–93
CLI prompt, 5–98
control of metadata, 5–63 to 5–64
Compaq HSZ80 Array Controller ACS Version 8.3 Configuration and CLI Reference Guide
I–19