Compaq StorageWorks HSZ80 Configuration And Cli Reference Manual page 190

5–4 CLI Commands
The controller processes each command in sequence. You can continue entering
subsequent commands while the controller is processing prior commands. A
controller experiencing heavy data I/O may respond slowly to CLI commands.
NOTE: Due to space limitations, some examples in this manual contain commands
that exceed one line in length. In these instances, the paragraph preceding the
example identifies which command is continued on the next line.
Specific keys or a combination of keys allow you to recall and edit the last four
commands. This feature can save time and help prevent mistakes when you need to
enter similar commands during the configuration process. Table 5–1 lists the keys
used to recall and edit commands.
Up Arrow or Ctrl/B,
Down Arrow or Ctrl/N
Left arrow or Ctrl/D,
Right arrow or Ctrl/F
Ctrl/A
Ctrl/E
Ctrl/H or Backspace
Ctrl/J or Linefeed
Ctrl/U
Unit Naming
The host operating system identifies the location of units based on a logical unit
numbering (LUN) scheme.
Each unit number contains the following:
Table 5–1 Recall and Edit Command Keys
Key
Steps backward and forward through the four most recent
CLI commands
Moves the cursor left or right in a command line.
Toggles between insert and overstrike.
Moves the cursor to the end of the line.
Moves the cursor to the beginning of the line.
Deletes the word to the left of the cursor.
Deletes all characters on the same line as the cursor.
Function