Moving Storagesets - Compaq StorageWorks HSZ80 Configuration And Cli Reference Manual

Moving Storagesets

You can move a storageset from one subsystem to another without destroying its data
as shown in Figure 4–6. You also can follow the steps in this section to move a
storageset to a new location within the same subsystem.
NOTE: You can use the procedure in this section to migrate wide devices from an
HSZ70 controller in a BA370 rack-mountable enclosure to an HSZ80 environment.
However, if you have an HSZ40 or HSZ50 subsystem, you cannot migrate to an
HSZ80 in a BA370 rack-mountable enclosure. Refer to the HSZ80 Array Controller
ACS Version 8.3 Release Notes for drives that can be supported.
Figure 4–6. Moving a Storageset from one Subsystem to Another
CAUTION: Never initialize any container or this procedure will not pro-
tect data.
Compaq HSZ80 Array Controller ACS Version 8.3 Configuration and CLI Reference Guide
4–35
CXO5595A