5–47
CONFIGURATION SAVE
Forces a current copy of configuration information in a controller's non-volatile
memory into a configuration file on a disk. This allows the user to determine when a
copy of the configuration is saved. Use this command to explicitly save a single
controller's configuration. The command takes effect immediately. In a dual-
redundant configuration, issue this command to both controllers.
Use the INITIALIZE container-name SAVE_CONFIGURATION command to set up
the location of the configuration file on disk.
Syntax
CONFIGURATION SAVE
See also
CONFIGURATION RESET
CONFIGURATION RESTORE
INITIALIZE
Compaq HSZ80 Array Controller ACS Version 8.3 Configuration and CLI Reference Guide