Compaq StorageWorks HSZ80 Configuration And Cli Reference Manual page 355

Array controller acs version 8.3
Hide thumbs Also See for StorageWorks HSZ80:
Table of Contents

Advertisement

SCSI ID number
The representation of the SCSI address that refers to one of the signal lines
numbered 0 through 15.
SCSI-P cable
A 68-conductor (34 twisted-pair) cable generally used for differential bus
connections.
SCSI port
(1) Software: The channel controlling communications to and from a
specific SCSI bus in the system. (2) Hardware: The name of the logical
socket at the back of the system unit to which a SCSI device is connected.
serial data
A method transmission in which each bit of information is sent sequentially
transmission
on a single channel rather than simultaneously as in parallel transmission.
signal converter
See SCSI bus signal converter.
single ended I/O
A 16-bit I/O module. See also I/O module.
module
single-ended SCSI
An electrical connection where one wire carries the signal and another wire
bus
or shield is connected to electrical ground. Each signal's logic level is
determined by the voltage of a single wire in relation to ground. This is in
contrast to a differential connection where the second wire carries an
inverted signal.
spareset
A collection of disk drives made ready by the controller to replace failed
members of a storageset.
storage array
An integrated set of storage devices.
storage array
See storage subsystem.
subsystem
storageset
(1) A group of devices configured with RAID techniques to operate as a
single container. (2) Any collection of containers, such as stripesets,
mirrorsets, striped mirrorsets, and RAIDsets.
Compaq HSZ80 Array Controller ACS Version 8.3 Configuration and CLI Reference Guide
GL–15

Advertisement

Table of Contents
loading

Table of Contents

Save PDF