5–117
This example shows how to remove member DISK30000 from mirrorset MIRR1
created above. If the mirrorset has a replacement policy and an acceptable disk drive
is in the spareset, the controller automatically adds the spare disk drive to the
mirrorset.
SET MIRR1 REMOVE=DISK30000
This example shows how to add disk DISK30200 to the mirrorset MIRR1:
SET MIRR1 REPLACE=DISK30200
A copy operation begins immediately on DISK30200.
See also
ADD MIRRORSET
MIRROR
REDUCE
SHOW MIRRORSET
UNMIRROR
Compaq HSZ80 Array Controller ACS Version 8.3 Configuration and CLI Reference Guide