Delete Unit-Number - Compaq StorageWorks HSZ80 Configuration And Cli Reference Manual

5–55

DELETE unit-number

Deletes a logical unit from the controller configuration. The host cannot address
deleted units. If the controller's write-back caching feature is enabled, the controller
flushes the cached data to the unit's devices before deleting the unit.
Before using the DELETE unit-number command, clear any errors with the
CLEAR_ERRORS UNWRITEABLE_DATA or CLEAR_ERRORS LOST_DATA
commands.
Syntax
DELETE unit-number
Parameter
unit-number
Identifies the unit number to be deleted. The unit-number is the same name given to
the unit when it was created using the ADD UNIT command.
Example
This example shows how to delete disk unit number D103:
DELETE D103
Compaq HSZ80 Array Controller ACS Version 8.3 Configuration and CLI Reference Guide