Unit Switches - Compaq StorageWorks HSZ80 Configuration And Cli Reference Manual

3–58 Creating Storagesets

Unit Switches

You can enable (either add or set) the Unit switches listed in Table 3–5 for the listed
storagesets and devices. See Chapter 5, "CLI Commands," for an explanation of the
following Unit switches.
Container Type
RAIDset
Stripeset
Mirrorset
NoTransportable Disk
Transportable Disk
Passthrough
NOTE: ERROR_MODE is only valid on mirrorsets that have been enabled for
DT_SUPPORT.
Regardless of storageset type, the RUN and NORUN switches cannot be specified
for partitioned units.
Table 3–5 UNIT Switches for Storagesets