Accessing Units On A Given Port - Compaq StorageWorks HSZ80 Configuration And Cli Reference Manual

Host bus
Windows
NT
Controller
device bus
D100
Figure 4–2. Accessing Units on a Given Port
To assign the units to Port 1 and Port 2, use the following syntax:
SET THIS PORT_1_ID = (1,2)
SET THIS PORT_2_ID = (3,4)
To reassign target 1 and 2 to the Windows NT server host mode, use the following
syntax:
SET THIS_CONTROLLER HOST_FUNCTION (1,D)
SET THIS_CONTROLLER HOST_FUNCTION (2,D)
Compaq HSZ80 Array Controller ACS Version 8.3 Configuration and CLI Reference Guide
Host bus
Port 1 Port 2
HSZ80
Controller
device bus
D200 D300 D400
4–27
Digital
UNIX
CXO6478A