Destroy_Partition - Compaq StorageWorks HSZ80 Configuration And Cli Reference Manual

DESTROY_PARTITION

Marks the area reserved for a partition as available. The freed area is then
consolidated with any adjacent free areas.
You cannot destroy a partition that has been assigned a unit number. First enter the
DELETE unit-number command to delete the unit using the partition.
After you partition a container, you must initialize it in order to destroy the partitions.
Syntax
DESTROY_PARTITION container-name PARTITION=partition-number
Parameters
container-name
Identifies the disk or storageset containing the partition to be destroyed. This is the
name given to the container when it was created using the ADD command (for
example, ADD DISK, ADD STRIPESET, and so forth).
partition-number
Identifies the partition to be destroyed. Use the SHOW container-name command to
identify the correct partition before carrying out the DESTROY_PARTITION
command.
CAUTION: Data contained on a partition is lost when you enter the
DESTROY_PARTITION command.
Compaq HSZ80 Array Controller ACS Version 8.3 Configuration and CLI Reference Guide
5–57