Compaq StorageWorks HSZ80 Configuration And Cli Reference Manual page 211

5–25
Examples
This example shows how to create a stripeset named STRIPE1 with three disks:
DISK10000, DISK20100, and DISK30200:
ADD DISK DISK10000 1 0 0
ADD DISK DISK20100 2 1 0
ADD DISK DISK30200 3 2 0
ADD STRIPESET STRIPE1 DISK10000 DISK20100 DISK30200
This example show how to create a stripeset named STRIPE1 and then create a
logical unit from it:
INITIALIZE STRIPE1
ADD UNIT D103 STRIPE1
This example shows how to create a two-member striped mirrorset (a stripeset whose
members are mirrorsets), and how to create a logical unit from it. Because you can
initialize the stripeset, you do not need to individually initialize the mirrorsets.
ADD DISK DISK10000 1 0 0
ADD DISK DISK20100 2 1 0
ADD DISK DISK30200 3 2 0
ADD DISK DISK40300 4 3 0
ADD MIRRORSET MR1 DISK10000 DISK20100
ADD MIRRORSET MR2 DISK30200 DISK40300
ADD STRIPESET STRIPE1 MR1 MR2
INITIALIZE STRIPE1
ADD UNIT D104 STRIPE1
Compaq HSZ80 Array Controller ACS Version 8.3 Configuration and CLI Reference Guide