Rename - Compaq StorageWorks HSZ80 Configuration And Cli Reference Manual

RENAME

Renames a container.
Syntax
RENAME old-container-name new-container-name
Parameters
old-container-name
Specifies the existing name of the container.
new-container-name
Assigns the new name for the container.
See "Changing the CLI Prompt," page 5–6, for information regarding container
naming rules.
NOTE: Units may not be renamed.
Example
This example shows how to rename DISK10000 to MYDISK:
SHOW DISKS
Name Type
-----------------------------------------------------------------
DISK10000
DISK10100
Port Targ Lun Used by
disk 1 0 0 D100
disk 1 1 0 D101
Compaq HSZ80 Array Controller ACS Version 8.3 Configuration and CLI Reference Guide
5–81