Table of Contents
Advertisement
Press
SCSI Target," then press ENT.
Press
then press ENT.
Slot Number
To set the Slot number of the SCSI
target, choose "Slot Assignment," then
press ENT. The current slot number
will be displayed.
Press
number, then press ENT for two
seconds.
Maximum Synchronous Transfer Clock
Press
then press ENT.
To set the maximum synchronous
clock of this SCSI target, choose "Max.
Synchronous Xfer Clock," then press
ENT. The current clock setting will be
displayed on the LCD.
Press
press ENT for two seconds.
Maximum Transfer Width
Press
then press ENT.
To set the maximum transfer width of
this SCSI target, choose "Max. Xfer
Narrow Only" or "Max. Xfer Wide
Supported," then press ENT. The
5-31
or
to select "View and Edit
or
to select a SCSI target,
or
to change the slot
or
to select a SCSI target,
or
to change the clock, then
or
to select a SCSI target,
SCSI Target
CHL=1 ID=0
..
Slot Assignment
Default No Set..
Slot Assignment
Set to
# 9
SCSI Target
CHL=1 ID=0
..
Max Synchronous
Xfer Clock# 12..
Period
Factor
Def= 12 to
-- ?
SCSI Target
CHL=1 ID=0
..
Max Xfer Wide
Supported
..
Infortrend
?
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the External RAID Controller & Subsystem Infortrend and is the answer not in the manual?