Setting A Scsi Channel's Id - Host Channel; Viewing Ids; Adding A Channel Id - Compaq External RAID Controller & Subsystem Infortrend Operation Manual

Every time you change channel mode, you must reset the controller for the
changes to take effect.

Setting a SCSI Channel's ID - Host Channel

Viewing IDs

Press ENT for two seconds to enter the
Main Menu. Press
"View and Edit SCSI Channels," then
press ENT.
Channel information will be displayed.
Press ENT on the host channel you
wish the ID changed.
Press
Channel ID," then press ENT.
Press
existing ID settings. Press ENT on any
to continue.

Adding a Channel ID

Press ENT on a host channel, on "Set
SCSI Channel ID", and then on an
existing ID.
Press
SCSI ID", then press ENT.
Press
Controller" or "Secondary Controller",
then press ENT for two seconds to
confirm.
Press
wish to add, then press ENT for two
seconds to complete the process.
Front Panel Operation
IMPORTANT!
or
or to select "Set SCSI
or to browse through the
or to choose "Add Channel
or to choose "Primary
or to choose the SCSI ID you
View and Edit
to select
SCSI Channels
CH0=Host
SID=NA SXF=20.0M
Set SCSI Channel
ID
CHL=0 ID=0
Primary Ctrl
Add Channel
SCSI ID
Primary
Controller
Add CHL=0 ID=2
Primary Ctlr
PID=0
..
..
..
?
?
5-26