Adding A Global Spare Drive; Rebuild Settings - Compaq External RAID Controller & Subsystem Infortrend Operation Manual

Adding a Global Spare Drive

Press ENT for two seconds to enter the
Main Menu. Press
"View and Edit SCSI Drives," then
press ENT.
SCSI
displayed on the LCD. Press
select a SCSI drive that has not been
assigned to any logical drive yet, then
press ENT.
Press
Spare Drive," then press ENT.
Press ENT again for two seconds to
add the spare drive. The message
"Add Global Spare Drive Successful"
will be displayed on the LCD.

Rebuild Settings

Press ENT for two seconds to enter the
Main Menu. Press
"View and Edit Config Parms," then
press ENT.
Press
Parameters," then press ENT.
Press
Priority Low," then press ENT. "Low"
refers to the temporary setting.
Press ENT again and the abbreviation
mark ".." will change to question mark
"?". Press
"Low," "Normal," "Improved," or
"High".
Press ENT to confirm and the question
mark "?" will turn into "
5-15
or
drive information
or to select "Add Global
or
or to select "Disk Array
or to select "Rebuild
or to select priority
..
".
View and Edit
to select
SCSI Drives
will be
C=2 I=4
or to
NEW DRV
Add Global Spare
Drive
Add Global Spare
Drive Successful
View and Edit
to select
Config Parms
Disk
Parameters..
Rebuild Priority
Low
Rebuild Priority
Low
Rebuild Priority
High
1010MB
SEAGATE
..
Array
..
?
..
Infortrend