5.13
System Functions
Choose "System Functions" in the main menu, then press ENT.
Press
Mute Beeper
When the controller's beeper has been
activated, choose "Mute beeper," then
press ENT
temporarily for the current event. The
beeper will still activate on the next event.
Change Password
Use the controller's password to protect the system from
unauthorized entry.
regardless of whether the front panel, the RS-232C terminal interface
or the RAIDWatch Manager is used, the user can only configure and
monitor the RAID controller by providing the correct password.
The controller requests a password whenever user is entering the main
menu from the initial screen or a configuration change is made. If the
controller is going to be left unattended, the "Password Validation
Timeout" should be set to "Always Check."
Controller password and controller name share a 16-character space. The
maximum number of characters for controller password is 15.
characters are used for a controller name, there will be only one character
left for controller password and vice versa..
Changing Password
To set or change the controller password,
press
Password," then press ENT.
Front Panel Operation
or
to select a submenu, then press ENT.
to
turn
the
Once the controller's password is set,
IMPORTANT!
or
to
select
Mute Beeper
beeper
off
Change Password
"Change
..
If 15
..
5-34
Need help?
Do you have a question about the External RAID Controller & Subsystem Infortrend and is the answer not in the manual?