Optimization Mode - Compaq External RAID Controller & Subsystem Infortrend Operation Manual

Optimization Mode:

SCSI Parameters:
Spin-Up Parameters:
Fibre Channel Parameters:
Infortrend
Date and time
Time zone
Write-back Cache
Array stripe size
Optimization for
Random/Sequential
Array write policy
Data Transfer Rate
Maximum Tag Count
Maximum Queued
I/O Count
LUN's per SCSI ID
Periodic Drive Check
Time
Periodic SAF-TE and
SES Device Check
Time
Periodic Auto-Detect
Failure Drive Swap
Check Time
Number of Host-LUN
Connection
Tag per Host-LUN
Connection
Wide Transfer
Parity Check
Motor Spin-Up
Reset at Power-UP
Initial Disk Access
Delay
Fibre Connection
Options
Fibre Channel Dual-
Loop
Host ID/WWN name
list
LUN Filtering
RCC through Fibre
channel
N/A
+ 8 hrs
Enabled Disabled
Related to controller general
setting
Sequential Either (sequential for LD larger than
512MB and can not be changed)
Related to controller general
setting
* Async. To 100.0MHz
32 1-128
32 32 to 1024
8 Up to 32
Disabled Enabled
5 Disabled to 60 seconds
Disabled 5 to 60 seconds
32 1 to 1024
32 1 to 256
* Enabled/Disabled
Disabled Enabled
Disabled Enabled
Enabled Disabled
* None to 75 seconds
* Loop Only
Point-to-Point Only
Loop Preferred
Point-to-Point Preferred
Enabled Enabled by cabling
* User configurable
* Host Access Filter Control
Configurable - filter type - access
right - name
* Dedicated or sharing drive channel(s)
4KB to 256KB
W/B or W/T
2-11